Seite 3 von 4 ErsteErste 1234 LetzteLetzte
Zeige Ergebnis 21 bis 30 von 34

Thema: 5.11 Firmware and Remote Access

  1. #21
    Registriert seit
    19.02.2009
    Ort
    MANOTICK
    Beiträge
    866

    Standard

    Got your email Allen, thought I would reply here for everyone to see.

    The LAN connection is referring to PAB only updates not Controller these still are done over RS232 or USB.

    My preffered method for controller updates is using the download tool over RS232, fail safe


    GHL ProfiLux Canada/USA Distribution and support

  2. #22
    Registriert seit
    15.05.2010
    Ort
    Waynesville, North Carolina USA
    Beiträge
    463

    Standard

    Micheal I appreciate your taking the time to reply to this.

    I hope you have a great day! Thanks to all of your hard work I am sitting here "tinkering" with my P3 (wirelessly of course) and having a BLAST! It's like Santa came early

    THANK YOU!!

  3. #23
    Registriert seit
    07.06.2009
    Beiträge
    738

    Standard

    Zitat Zitat von aqua_digital Beitrag anzeigen
    My preffered method for controller updates is using the download tool over RS232, fail safe
    same here, but I use USB to serial.

  4. #24
    Registriert seit
    15.05.2010
    Ort
    Waynesville, North Carolina USA
    Beiträge
    463

    Standard

    I just did the update with no issues. I too connected RS232/USB connection.

  5. #25
    Registriert seit
    19.02.2009
    Ort
    MANOTICK
    Beiträge
    866

    Standard

    Zitat Zitat von Blahenazo Beitrag anzeigen
    same here, but I use USB to serial.
    I am actually looking at including in all kits for our sales region USB adapters that we have proven to work so everyone can use the download tool, its so much easier and quicker


    GHL ProfiLux Canada/USA Distribution and support

  6. #26
    Registriert seit
    15.05.2010
    Ort
    Waynesville, North Carolina USA
    Beiträge
    463

    Standard

    Zitat Zitat von aqua_digital Beitrag anzeigen
    I am actually looking at including in all kits for our sales region USB adapters that we have proven to work so everyone can use the download tool, its so much easier and quicker
    I think that would be a GREAT idea and possibly help to eliminate some future problems with "non-compatible" cables and adapters.

  7. #27
    Registriert seit
    30.01.2010
    Ort
    Greece
    Beiträge
    212

    Standard

    Upgrade to FW 5.11, no Web interface.
    Make a reset, nothing change. Erase own files, still no web interface. In fact, could not even connect to laptop through LAN cable, only through USB cable.

    Downgrade to FW 5.10, Web ok (as before the upgrade).

    Upgrade again to FW 5.11, again no Web interface. But this time I could connect through LAN cable from my laptop.
    Make a reset and erase own file from Web site, still no Web interface, but still able to connect to my laptop through LAN cable.

    Downgrade to FW 5.10, Web ok again.

    All results were regardless I was using PLC 5.1.1.2 or 5.1.0.0.

    No error message through the upgrade.
    Must be some kind of bug.

    Worlds most gadget Aquarium.. almost.

  8. #28
    Registriert seit
    07.06.2009
    Beiträge
    738

    Standard

    maybe inform them about which lange of FW you use

    In the past there have been small differences between the same FW but another language. (like a bug only in DE version etc... )

    you never know.

  9. #29
    Registriert seit
    30.01.2010
    Ort
    Greece
    Beiträge
    212

    Standard

    I am using 5.11 Ger-Eng using English lang.

    Worlds most gadget Aquarium.. almost.

  10. #30
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.638

    Standard

    this is more than strange

    I tried it with the newest firmware D/E and IE9, language = English, and the result was this:
    wbi-eng-511.jpg


    The first question to clear is: I ist a general problem with the LAN-interface? Or is "only" the web interface not displayed but the direct connection with PL over LAN is working? What browser are you using?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •