Results 1 to 3 of 3

Thread: Cooling solutions

  1. #1
    Join Date
    02.02.2011
    Posts
    39

    Cool Cooling solutions

    Dears,
    I have a tank with the following dimension : 100 * 60 * 50(h) cm
    the tank is rimless without canopy
    with a total net volume (sump included) of 300 liters.
    The tank is illuminated by 8 X 39w T5 (matrix Giesemann).

    I already have a Profilux 3 and i have 2 power Sockets free and one L Port free.
    My temperature during summer was up to 27.5° , i had a temp. light dependant set on 6 t5 to limit the heat.
    So, i believe that i should just reduce from 1 to 1.5 degrees the temp of the tank during hot periods.
    I am living in belgium, meaning that the hot days are rare: 15 days per year maximum :-(

    What are the pros and cons of using the propellerbreeze from GHL or another brand (plugged in a socket) ?
    What do i need ? 3 , 4 or 5 fans ?
    And if i go for a ghl solution, what do i need ? PL-0265 , PL-0716 / PL-0717 / PL-0718 , do i need a L cable ? or it's included in PL-0265 ?

    When i use a propellerbreeze, can i still use the temp. light dependant feature ?

    Thank u in advance for your feedback or experience
    - Geoffroy



    100X60X50 (cm) - 300 l. total net volume
    Profilux 3 + Dosing Pump - PH & Temp Probe - Level - 2 Powerbar 6D
    ATI Powercone 200 - Vertex UF-15 biopellet loaded
    Giesemann Matrix 8 X 39w



  2. #2
    Join Date
    18.05.2011
    Location
    Kaiserslautern, Germany
    Posts
    139

    Default

    Hello,

    Quote Originally Posted by Geoffroy Docq View Post
    What do i need ? 3 , 4 or 5 fans ?
    It's always a bit hard to say exactly which size is suited best for a customer's tank - since
    many conditions have an influence such as canopy yes/no, how much heat is produced
    through lightning, is it a penthouse, by how many degrees shall the temperature be reduced etc.

    Quote Originally Posted by Geoffroy Docq View Post
    And if i go for a ghl solution, what do i need ? PL-0265 , PL-0716 / PL-0717 / PL-0718 , do i need a L cable ? or it's included in PL-0265 ?
    Yes, you only need the PL-0265 (Propeller Control) + the Propeller Breeze. You need one channel of an L-Port.

    Quote Originally Posted by Geoffroy Docq View Post
    When i use a propellerbreeze, can i still use the temp. light dependant feature ?
    Yes, both functions can work parallely.
    GHL Store
    www.ghl-store.com

  3. #3
    Join Date
    02.02.2011
    Posts
    39

    Default

    Thank u for your answer.
    I was hoping that some profilux users can share their experience on cooling with the propellerbreeze.
    thx
    - Geoffroy



    100X60X50 (cm) - 300 l. total net volume
    Profilux 3 + Dosing Pump - PH & Temp Probe - Level - 2 Powerbar 6D
    ATI Powercone 200 - Vertex UF-15 biopellet loaded
    Giesemann Matrix 8 X 39w



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •