PIII ex, want to buy extra ledcontrol4active what needed?

[Gilles]

Current setup:
P3EX
4 dosing unit
6x powerbar (PAB)
Ledcontrol4active
fancontrol

If i am correct, (haven't looked behind my controller) all L ports are occupied.
I need 2 additional L ports (for 4 channels of the LedControl4 active).

Which expansion card do i need?
- PLM-2L4S
- PLM-4L

Thank you

[Wirus]

Which expansion card do i need?

Should be clear: PLM-4L with 2x 22 L-Ports.

Hint: If you want to flash with LEDControl4Active you have to re-arrange your ports in a way that the internal ports are used. The PLM-4L is not able to generate flashes.

[Gilles]

Oke if i understand correctly;
L1L2L3L4 = LedcontrolActive 1
L5L6 = Fancontrol

Adding this card wil add 4L ports;
L7L8
L9L10

If that is correct, assuming flashes are sent on first L port (L1L2)
Then i have to put LedControlActive(2) on L5L6(=internal = flash) and L7L8
Fancontrol on L9L10?

THank you
Gilles

[Wirus]

That´s correct.

[Gilles]

Thank you Wirus.