Seite 1 von 5 123 ... LetzteLetzte
Zeige Ergebnis 1 bis 10 von 43

Thema: SMS - Tank report

  1. #1
    Registriert seit
    08.04.2009
    Beiträge
    265

    Standard SMS - Tank report

    when i get a text from my profilux 3 via sms i don't get all of the tank report,

    I run a profilux 3 plus a expansion module,

    i get info for 2 x ph, 2 x salinity, 2 x redox. for the air/humidity sensor, all i get is the word air, no ready of the humidity or air temp,

    is there a limit of how many characters are sent via text
    this is how it reads,

    Tank report
    ph 1 8.23ph
    temp 1 24.1
    co.s 1.0186
    redx 1---
    ph2 7.97 ph
    temp 2 24.6
    co.s 2 1.0209
    redx 2 --
    Air.

    I am missing the air/humidy readings?

    can this be fixed,
    Geändert von reef (25.07.2011 um 14:40 Uhr)

  2. #2
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.631

    Standard

    Hi

    the problem is: SMS messages are limited to 160 characters.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Registriert seit
    08.04.2009
    Beiträge
    265

    Standard

    Any reason why it is limited to 160 characters?
    Should we not be able to get all the parameters,

  4. #4
    Registriert seit
    10.07.2010
    Ort
    Aschaffenburg
    Beiträge
    987

    Standard

    Any reason why it is limited to 160 characters?
    It´s exactly described here - and it´s a GSM standard behavior. It has nothing to do with GHL or the SMS module.

  5. #5
    Registriert seit
    08.04.2009
    Beiträge
    265

    Standard

    Great info thanks
    Maybe the characters can be reduced. So for redox you could have Rx. For saliniy SL etc

  6. #6
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.631

    Standard

    I will check what we can do with tne next firmware update.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  7. #7
    Registriert seit
    08.04.2009
    Beiträge
    265

    Standard

    Thanks, that would be great.
    I had a alarm today and because it was not under 160 characters i could not tell what the alarms was as it was missed in the status report.

  8. #8
    Registriert seit
    08.04.2009
    Beiträge
    265

    Standard

    Matthias,

    Is it possible to also not show disabled probes in the text message?
    I have a redox in my profilux 3, however I am not using it, I have disabled it, however it still shows in the text message when I get a report. shows redx 1 ---.

  9. #9
    Registriert seit
    08.04.2009
    Beiträge
    265

    Standard

    Matthias,

    I just noticed in the sms control software that their is no longer a responsive time?
    So when a alarm goes off you could delay being sent a sms a short period of time. so for example when a alarm is activated you could delay being send a alarm text for say 10 seconds. this stops being sent a sms when the alarm period is very small, as for example the power might go off for 2 seconds. i dont really need to be sent a sms for such short period.
    This used to be a option, just noticed that it is not anymore in the profilux control

  10. #10
    Registriert seit
    08.04.2009
    Beiträge
    265

    Standard

    Matthias,

    I just noticed in the sms control software that their is no longer a responsive time?
    So when a alarm goes off you could delay being sent a sms a short period of time. so for example when a alarm is activated you could delay being send a alarm text for say 10 seconds. this stops being sent a sms when the alarm period is very small, as for example the power might go off for 2 seconds. i dont really need to be sent a sms for such short period.
    This used to be a option, just noticed that it is not anymore in the profilux control

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •