Vortech/Profilux Module not connceting

[turaki tim]

Hello mr Murphy,

I sorted all my problems out...

You need a pab cable to connect the vortech controller you bought from profilux to the pab bus. The connection between the vortech controller and the mp40 is wireless.

First you need to update the mp40 drivers by putting the mp40 in slave/update receiver mode individually and then launching the update from the plc software.

Then you just follow the instructions....

Good luck!


Sent from my iPad using Tapatalk

[mr murphy]

where on the vortech controller does the pab lead connect or on the pump itself. there is no pab socket. i purchased the ghl vortech controller that has 2 pab sockets. the controller that came with the mp40 has no pab socket neither does the pump.

[mr murphy]

Hello mr Murphy,

I sorted all my problems out...

You need a pab cable to connect the vortech controller you bought from profilux to the pab bus. The connection between the vortech controller and the mp40 is wireless.

First you need to update the mp40 drivers by putting the mp40 in slave/update receiver mode individually and then launching the update from the plc software.

Then you just follow the instructions....

Good luck!


Sent from my iPad using Tapatalk

okkayyy understood. i thought that pumps are suppose to be powered through the profilux L ports. on 110v. does this mean i use the power plug provided in a normal plug socket? not profilux? so to sum up i power up pumps as normal without connecting to profilux in any way, then i connect just the ghl controller to profilux, then i connect pumps wirelessly to ghl controller?

[mr murphy]

Hello mr Murphy,

I sorted all my problems out...

You need a pab cable to connect the vortech controller you bought from profilux to the pab bus. The connection between the vortech controller and the mp40 is wireless.

First you need to update the mp40 drivers by putting the mp40 in slave/update receiver mode individually and then launching the update from the plc software.

Then you just follow the instructions....

Good luck!


Sent from my iPad using Tapatalk

please can you provide step by step instructions on how to update drivers, putting pumps in slave mode, then launching update. can im do this while there is no water in the tank yet or will pump be damaged