Results 1 to 4 of 4

Thread: Hot plug touch unit

  1. #1
    Join Date
    29.04.2011
    Posts
    35

    Default Hot plug touch unit

    Hi there,

    Is the USB cable from the control unit to the actual LCD screen hot plugable and extendable?
    So, if you have the LCD attached to your hood for example, could you easilly disconnect the cable and reconnect later without having to power down?

    I take it you use a USB cable for convenience and there's not USB protocol running?

    Cheers,

    Steve

  2. #2
    Join Date
    07.06.2009
    Posts
    738

    Default

    *post removed*
    Last edited by Blahenazo; 04.06.2011 at 17:33.

  3. #3
    Join Date
    29.04.2011
    Posts
    35

    Default

    Theres a PAB cable to a control box, as well as an external PSU.
    Then, theres a USB cable to the actual LCD display unit.

    No matter, I've jiggled things about, and mounted the display to the wall.

    Cheers.

  4. #4
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    No, it is not allowed to hot-plug it! This is mentioned in both manuals.

    There is is no USB protocal running.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •