Page 1 of 2 12 LastLast
Results 1 to 10 of 28

Thread: Vortech ecosmart update

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    20.12.2010
    Posts
    11

    Default Vortech ecosmart update

    Right after taking me till this morning 2am to figure out that I have to update the vortech controller through the PAB update I have finally got it up and running and gives me firmware 1.01 rf 1.02 and interface 1.02. I updated the ecosmart firmware via the controller to 1.06 but it now tells me both pumps are version 2.02 and doesnt give me the status or what type of pump.

    Can anyone help, is this correct or do I need to change something?

    I am using PLC 5.09 and firmware 5.09
    Last edited by jumboswart; 03.06.2011 at 08:23.

  2. #2
    Join Date
    07.06.2009
    Posts
    738

    Default

    did you try a PAB reset ?

    PAG resetting sometimes helps with getting the right FW versions after a flash

  3. #3
    Join Date
    20.12.2010
    Posts
    11

    Default

    Quote Originally Posted by Blahenazo View Post
    did you try a PAB reset ?

    PAG resetting sometimes helps with getting the right FW versions after a flash
    Will check to see if that works thanks

  4. #4
    Join Date
    12.05.2010
    Posts
    343

    Default

    2 of my pumps say 1.6, another one says 2.01 and then another says 2.02 haha but it hasn't been a problem for me, I would have no idea on how to update the pumps to 2.02

  5. #5
    Join Date
    20.12.2010
    Posts
    11

    Default

    Ok so I found out the MP 60's come with firmware 2.01 and the profilux vortech controller just updated them to 2.02 and they are working. What I am now wondering is why the type shows unknown and there is no status?


  6. #6
    Join Date
    12.05.2010
    Posts
    343

    Default

    I have 5 mp40 and none of them show a status but all show type

  7. #7
    Join Date
    25.09.2009
    Posts
    62

    Default

    I have asked EcoTech this very question yesterday, no answer as of yet though.

    Sent from my Desire HD using Tapatalk

  8. #8
    Join Date
    25.09.2009
    Posts
    62

    Default

    Ok guys, I have had an answer from EcoTech...

    These are the latest firmware versions

    ES pumps are 2.02
    W pumps are 3.01

  9. #9
    Join Date
    29.04.2011
    Posts
    35

    Default

    Good to know.
    I updated all 3 of my Vortech pumps using my Profilux the other day, no problem at all.

  10. #10
    Join Date
    12.05.2010
    Posts
    343

    Default

    Quote Originally Posted by rattters View Post
    Ok guys, I have had an answer from EcoTech...

    These are the latest firmware versions

    ES pumps are 2.02
    W pumps are 3.01
    Thanks for finding out.

    GHL is it possible to get the new firmware added to the Vortech Module so we can all upgrade our Votechs to the latest FW???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •