Results 1 to 3 of 3

Thread: Sharing Tunze Settings

  1. #1
    Join Date
    02.02.2011
    Posts
    39

    Frage Sharing Tunze Settings

    Dears all,

    I would like to know if some of you can share their settings related to pump controls and especially the Tunze pumps.
    Please don't forget to provide also the dimension of the aquarium/tank and the ecosystem you are willing to reproduce (if any), photos or plans are welcome

    For my part, i have a rimless tank of 100(L)*60(l)*60h.
    The flow is controlled by 2 nano 6055 (each corner), see below the photo of my tank (minimalist).

    Thank u for sharing

    I am using the following settings :
    2 pumps in one group
    Permanent Opposite
    Sinus Wave
    Min and Max duration : 30 seconds
    Wave reduction : 0%

    Each Pump : from 1 to 100%
    At night : 40%
    Thunderstorm : 100% (I run 3 thunderstorm per week with a duration of 8 minutes)

    IMG_0034.jpg
    - Geoffroy



    100X60X50 (cm) - 300 l. total net volume
    Profilux 3 + Dosing Pump - PH & Temp Probe - Level - 2 Powerbar 6D
    ATI Powercone 200 - Vertex UF-15 biopellet loaded
    Giesemann Matrix 8 X 39w



  2. #2
    Join Date
    22.10.2010
    Location
    Netherlands
    Posts
    224

    Default My Tunze Settings

    corner aquarium 300L + 80L sump
    2x Tunze 6055
    The aquarium is running for 4 month's now


    pump_settings.jpg

    mijnbak.jpg

    webinterface3.jpg

    101_bak vol leidingwater.jpg
    Last edited by mdanielse; 14.11.2011 at 14:44.

  3. #3
    Join Date
    11.09.2011
    Posts
    44

    Default

    I am soon to set two tunzes 6055 and I would be very grateful if anybody else could share their settings...

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •