Results 1 to 2 of 2

Thread: Which Powersupply do I Need for Led control4active

  1. #1
    Join Date
    28.05.2011
    Posts
    3

    Default Which Powersupply do I Need for Led control4active

    Hello,

    I'm interested in doing a diy project for my led's above my aquarium.
    In the manual is written that i can use up to 3A per channel, So do i need a powersupply with 12Amps?? or can i use the original DC Adapter from ghl.
    The adapter from GHL deliveres 1,5 A.

    Has anyone had any experians with this.

    (excuse my English, I'm from the Netherlands and neither my German or English grammatics are good.)

    thnx greetz Marco
    Last edited by dnovanl; 30.05.2011 at 09:26.

  2. #2
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    In the manual is written that i can use up to 3A per channel, So do i need a powersupply with 12Amps??
    You should read the complete sentence: Max. current per channel or in sum

    You need an adapter that suits your LEDs and you have to respect the the limits of LEDControl4active which are 3A in sum and a max. voltage of 18V.
    It also may a good idea to have one who has a connector suitable for the 2.1/5.5mm socket.
    Last edited by Wirus; 30.05.2011 at 09:28.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •