Results 1 to 5 of 5

Thread: Eheim 3e 700 functions supported

  1. #1
    Join Date
    30.04.2011
    Posts
    44

    Default Eheim 3e 700 functions supported

    Are all(!) functions available in the Eheim ControlCenter also available from Profilux + Eheim controller for the 3e 700?

    Ruud

  2. #2
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    What do you mean mit all functions?

    With the EHEIM-Controller the filter is operated in constant flow mode.
    The flow and the estimated time to next service displayed at ProfiLux.

  3. #3
    Join Date
    30.04.2011
    Posts
    44

    Default

    With 'all' I mean next to 'constant flow' also 'bio function' (but I guess this should be feasible realizing this with 12h on one constant flow rate and 12h on another via PL) and 'stream function' (sinusodial or wave control).
    Especially the last one is what I am interested in.

  4. #4
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    Only the constant flow mode is supported.
    You could set up waves for the EHEIM filter in your ProfiLux.
    But be aware: the filter is no stream pump so only slow waves make sense (15s and up)

  5. #5
    Join Date
    07.03.2010
    Location
    Nederland
    Posts
    62

    Default

    Is there a change PLC will be upgraded to make it possible to control the filter like the Eheim software does, including manual control? I suppose it's only a software issue.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •