Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Email notification (Profilux) BUG......

  1. #1
    Join Date
    22.10.2010
    Location
    Netherlands
    Posts
    224

    Default Email notification (Profilux) BUG......

    Hello there,

    I think I found a small bug in the Email notification function from the Profilux.

    -When I have a alarm on my Level1(min-max), the Profilux sends me a email with a LEVELalarm notification, this works good. Now I correct the Level1 problem, so the Level1 alarm stops.
    -At this point I disconnect the PAB cable from the PAB-powerbar or disconnect the mainpower, the Profilux sends me again an email with a PABCOM alarm in it. This is also the way it should work, no problem so far.


    But here is the(my) bug.
    -I have a Level1 alarm, the Profilux sends me a email, but this time I do not correct the Level1 problem and thus the LEVELalarm remains. Then I disconnect the PAB cable from the powerbar. On the Profilux display I now see 2 alarms the LEVEL alarm and the PABCOM alarm. This is also correct. But now for the Bug.......
    I do not get a email for the PABCOMM alarm, the only email i got was from the LEVEL alarm??
    Because it is a new alarm i would expect to get also a email from this PABCOM incident.


    Am i doing something wrong, or is this a little bug in the firmware(5.07)....?


    With Kind Regards,
    Jack

    Email settings
    STATUS1.jpg

    Email message
    ALARM3.jpg

  2. #2
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    we check this
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    22.10.2010
    Location
    Netherlands
    Posts
    224

    Default

    Thanks, I will keep an eye on this thread for the outcome......

  4. #4
    Join Date
    23.02.2011
    Posts
    112

  5. #5
    Join Date
    23.02.2011
    Posts
    112

    Default

    Oops I accidentally pressed on the send
    I ment to say that it's the same with the SMS

  6. #6
    Join Date
    22.10.2010
    Location
    Netherlands
    Posts
    224

    Default

    Still not solved, any news yet?.
    Or is it not a bug and am I doing something wrong?....
    Same problem seems to a occure with alarm sms.
    Just one message is send, and when the alarm remains(this alarm is not corrected) and a new alarm occurs.... this second (new)alarm is not send by mail and or sms.


    Quote Originally Posted by Matthias View Post
    we check this
    Last edited by mdanielse; 06.01.2012 at 02:38.

  7. #7
    Join Date
    07.06.2009
    Posts
    738

    Default

    not your fault

    I discribe it too some time ago ( didn't get any respond so )


    http://forum.aquariumcomputer.com/sh...ighlight=alarm

  8. #8
    Join Date
    22.10.2010
    Location
    Netherlands
    Posts
    224

    Default

    Is this a error or am I doing something wrong.

    Still havened got a answer, regarding the outcome of you investigating this possible problem.
    It hase been half a year now.....


    Quote Originally Posted by mdanielse View Post
    Still not solved, any news yet?.
    Or is it not a bug and am I doing something wrong?....
    Same problem seems to a occure with alarm sms.
    Just one message is send, and when the alarm remains(this alarm is not corrected) and a new alarm occurs.... this second (new)alarm is not send by mail and or sms.

  9. #9
    Join Date
    01.01.2012
    Location
    Netherlands
    Posts
    12

    Default

    Hello,

    I know that this is an old thread, but is there any news about this problem.
    Because i'm having almost the same problem.

    When my level 1/ato makes a alarm because i am out of osmosewater and send a alarm/email and now i am not at home, the alarm is still active. because i don't reset it.
    But now my greatest fear: my aquarium glass breaks and it triggers my leakage alarm, in this situation my lower neighbors will know it before i do because there will not be send a alarm/email.

    I think that this a simple item to fix in a firmware update.

  10. #10
    Join Date
    22.10.2010
    Location
    Netherlands
    Posts
    224

    Default

    Yes, an old threat, but still valid.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •