Has Anyone attempted to connect Meanwell ELN-60-48P drivers to an LED Control4 ?

[TheManicFishkeeper]

Tinkering with an LED Control 4 (Passive) tonight, and trying to get it to fire up a Meanwell ELN-60-48P driver with no luck. Curious if anyone has any idea if they are compatible or if I'll need to build another circuit to make them talk nicely to each other.

This is the driver in question:

http://www.meanwell.com/search/eln-60/eln-60-spec.pdf

Driver is verified wired correctly for the LED's and power (driver will power up, and the LED string will get the typical discharge flash when it loses power), however I can't seem to get any PWM control.

LEDControl4 module is connected to L1L2, White wire (Dim -) off the driver is connected to Pin 1 of the connector, Blue wire (Dim +) is connected to Pin 2.

Any thoughts? I can't seem to locate much technical info other then the datasheet I posted above.

Thanks in advance,

G.