dosing control

[knpatel]

Need info on setting up following slave doser is connected to IIex.
a) Pump 1 - to dispense 30 ml per day at 7 pm, every day of the week.

b) Pump 2 - to dispense 30 ml on Monday, Wednesday and Friday at 7:15pm.

[Matthias]

if you want to dose at certain times you have to use a timer instead of the standard dosing function:

- set a timer x according to the times you mentioned above, use mode "dose" and enter an on-time in seconds (if the pump has a flow of 60ml/minute then enter 30s for 30ml
- assign function "timer x" to the socket (in this case the socket is the dosing pump)

[knpatel]

if you want to dose at certain times you have to use a timer instead of the standard dosing function:

- set a timer x according to the times you mentioned above, use mode "dose" and enter an on-time in seconds (if the pump has a flow of 60ml/minute then enter 30s for 30ml
- assign function "timer x" to the socket (in this case the socket is the dosing pump)

OK that makes sense dosing everyday, what are the sequences for dosing on an alternative day?

[Matthias]

you can choose specific days of week for a timer