Results 1 to 4 of 4

Thread: dosing control

  1. #1
    Join Date
    03.06.2009
    Posts
    2

    Default dosing control

    Need info on setting up following slave doser is connected to IIex.
    a) Pump 1 - to dispense 30 ml per day at 7 pm, every day of the week.

    b) Pump 2 - to dispense 30 ml on Monday, Wednesday and Friday at 7:15pm.

  2. #2
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,724

    Default

    if you want to dose at certain times you have to use a timer instead of the standard dosing function:

    - set a timer x according to the times you mentioned above, use mode "dose" and enter an on-time in seconds (if the pump has a flow of 60ml/minute then enter 30s for 30ml
    - assign function "timer x" to the socket (in this case the socket is the dosing pump)

  3. #3
    Join Date
    03.06.2009
    Posts
    2

    Default

    Quote Originally Posted by Matthias View Post
    if you want to dose at certain times you have to use a timer instead of the standard dosing function:

    - set a timer x according to the times you mentioned above, use mode "dose" and enter an on-time in seconds (if the pump has a flow of 60ml/minute then enter 30s for 30ml
    - assign function "timer x" to the socket (in this case the socket is the dosing pump)
    OK that makes sense dosing everyday, what are the sequences for dosing on an alternative day?

  4. #4
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,724

    Default

    you can choose specific days of week for a timer

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •