Results 1 to 4 of 4

Thread: T5 dimming with Profilux Plus II Profiset

  1. #1
    Join Date
    21.12.2010
    Location
    Bern
    Posts
    4

    Default T5 dimming with Profilux Plus II Profiset

    Hi everyone!

    I have a Profilux Plus II profiset and also a dimmable ballast for 2x 80W T5s (Osram Quicktronic Intelligent) with 1-10V interfaces.

    My understanding was that the Profilux Plus II was sufficient to dim this ballast.
    If that´s the case, does GHL sell the cable to do the connection from the Profilux (L1-L4) to the ballast? or is there a description of the cable to do one myself?

    If not, what else is needed?

    Thanks in advance!
    Alex

  2. #2
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    You can take our board EVG-AP-1F (one channel, with internal shut-off, no housing) or our LF-ABOX (one channel, with internal shut-off). For further details please have a look here: http://forum.aquariumcomputer.com/sh...dimmable)-lamp

  3. #3
    Join Date
    21.12.2010
    Location
    Bern
    Posts
    4

    Default

    Hi Carolin,

    Thanks for the answer.
    I tried to access the link the thread you´re refering to but it´s not working
    http://aquariumcomputer.com/Download...G-AP2_V400.pdf
    Can you please point to the right address?

    So from answer, shall I understand that the Profilux computer does not deliver the 1-10V control signal and therefore they have to be adapted with those additional devices. Am I right?

    Thanks,
    Alex

  4. #4
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •