Results 1 to 10 of 12

Thread: filter jumps into mode "auto-off" intermediately

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    13.08.2010
    Posts
    42

    Ausrufezeichen filter jumps into mode "auto-off" intermediately

    matthias,

    i installed 5.0.5.4, the status switches between normal and normal aut

  2. #2
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    do you mean "normal auto off"? maybe the last chars are truncated

    I just changed PLC 5.0.5.4 and increased the size of the status box - please install the updated PLC in order to get the full text
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    13.08.2010
    Posts
    42

    Default

    it now reads: normal auto off (and sometimes: normal)

  4. #4
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    "auto off" means that your filter is not able to produce the desired flow -> actual flow is lower, maybe the filter needs to be cleaned or the hoses are too long, too thin or too dirty etc.

    could you reduce the flow percentage significantly? does the "auto off" disappear?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  5. #5
    Join Date
    13.08.2010
    Posts
    42

    Default

    i reduce the flow to 10%. so far it looks good.
    but what you say is that when the setup is bigger then the actual flow, the p3 loses control over the eheim.
    that's not good

  6. #6
    Join Date
    13.08.2010
    Posts
    42

    Default

    status is unkown, that's ok. but not losing control!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •