Warning when upgrading firmware and Dousing Pumps

[xiaan]

If you are using dousing pumps I would recommend you disconnect them before you upgrade the firmware. If your settings are cleared your dousing pumps will be set to on and will pump until you reset your settings.

I had this happen to me when I upgraded from ver 4.05 to 4.06 of the firmware. and I douse my tank with 100ml of AA

[Matthias]

A very good hint!

The firmware update process is a very critial moment - actually all devices like powerbars or dosing pumps should be disconneced until the update has been completed

[MAXreefer]

Just to confirm it happened to me also but only 1 out of the 3 pumps started running continuously.
This didn't happen when I upgraded fro 4.04 to 4.05 but only from 4.05 to 4.06

Michael