My red sea max 250

[arkoujohn]

I have seen the work you have done to the RSM250 and I tink its amazing.
As a result it inspired me to try to make the effort with my RSM.
Could you please send me some pictures of how all the connections (regarding the dimmable lighting) were done (if you have any available I would like to see how all those things are connected to the profilux, e.g. did you use the evg module?)

[Martin_S]

EVSA's

Type ELXd 239.610 ref.188339
http://www.vossloh-schwabe.de/images...-109-1-851.pdf

just connect to L1 L2 and L3

[arkoujohn]

I have seen these pictures. So you do not use evg module.
Do you have any picture that shows how you connect the white 6 wired cable to the profilux (sorry for the annoyance but I am not that experienced with electronics)

[Martin_S]

you connect the + and - from the Evsa ( ballast ) to

LBF-AP ( 2 evsa can be connected )
http://www.ghl-express.de/index.php?...6b248098779952

this you connect to the profilux L1- L2

Or just solder to the wires direct and connect a tel shoe

[arkoujohn]

As I can see in your pics you are using the dosing system, what are you dosing with it?

[Martin_S]

As I can see in your pics you are using the dosing system, what are you dosing with it?

CS marine line

[arkoujohn]

What is the difference between LBF-AP and EVG-AP-2F ?

[Martin_S]

LBF-AP is just 1-10 port from profi to EVSA

EVG-AP-2F is
1-10 port from profi to EVSA
port from 220 to EVSA

So EVG-AP-2F can also switch the EVSA off

where you need a second (timer) with the LBF-AP to switch it off

[arkoujohn]

When profi goes 0% does't it switch off the EVSA?

[GHL Support]

With EVG-AP (with internal shut-off) the tubes will be shut off completely, in case of LBF-AP (no internal shut-off) the tubes can keep on glowing.
In this case, the complete shut off can be achieved through a socket of our powerbars used as a timer.