Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34

Thread: vortech controller anyone?

  1. #1
    Join Date
    26.02.2010
    Posts
    7

    Default vortech controller anyone?

    Does anyone has the vortech controller on his profilux already? Mine is coming at week 40 ( next week ).

    Grtz,

    peter

  2. #2
    Join Date
    17.08.2009
    Posts
    132

    Default

    Yes, I've been testing the first one we recieved its pretty sweet. What did you want to know?

  3. #3
    Join Date
    30.12.2009
    Posts
    51

    Default

    can you post some pics up and maybea video / small review?

    As cant find any real information on these from users

  4. #4
    Join Date
    03.03.2009
    Location
    alingsås
    Posts
    133

    Default

    does it work with Profilux II??

  5. #5
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    does it work with Profilux II??
    No, it´s a PAB device. And PAB is not supported by PL II

  6. #6
    Join Date
    17.08.2009
    Posts
    132

    Default

    Will do, give me a day or so to get something written up.

  7. #7
    Join Date
    23.02.2009
    Posts
    70

    Default

    I can't get my firmware controller interface to update. It says version 0. and the Firmware RF-Module is the same.
    Last edited by chiefzod; 25.10.2010 at 07:35.

  8. #8
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    did you update the ProfiLuxControl (min. 5.0.4.2), firmware ProfiLux (min. 5.04a) AND firmware VorTech-Controller (min. 1.01) and follow exactly those instructions
    http://www.aquariumcomputer.com/Syst...ad.php?did=111
    ?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  9. #9
    Join Date
    23.02.2009
    Posts
    70

    Default

    Yes as far as i'm aware. Software and firmware it latest version.

    Have plugged the unit in.
    Found it on the profilux computer and assigned it.
    Connected with the PC software and done the firmware update to the Vortech controller.
    Vortech controller registers in the software and can see it's firmware is 1.01.
    Cannot update any further. Try to do updates and it says error couldn't start update
    Vortech are all reset but not connected yet as

  10. #10
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    Could you send us a screenshot of the VorTech screen?

    To make clear:
    you tried to update the VorTech interface, right? (not VorTech Controller or pumps).
    If you can't update further (greyed out) the VorTech interface has already the lastest firmware version.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •