Results 1 to 6 of 6

Thread: redox value

  1. #1
    Join Date
    13.08.2010
    Posts
    42

    Default redox value

    i bought myself a brandnew ghl redox probe. standard nominal value is around 200 mv
    my redox value is around 13mv
    is that normal or is my proble not functioning?

    redox.gif

  2. #2
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    Have you done a calibration?

  3. #3
    Join Date
    13.08.2010
    Posts
    42

    Default

    i can't remember that you can callibrate the redox probe. can someone confirm that calibration is possible?
    i'm not home, so can't check

  4. #4
    Join Date
    10.03.2009
    Posts
    478

    Default

    yes you have to calibrate the redux... it's fluid and the null plug

  5. #5
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    See manual for PL3 (equal for PL2):

    Page #9

    1.5.11 Redox (only ProfiLux 3 eX)
    At this BNC-connector (19) the Redox-sensor is connected. Please pay attention to the instructions of the sensor manufacturer. Do not forget to calibrate!
    ...

    Page #19

    If you have installed a measurement card: Do not forget the settings and calibration!
    ...

  6. #6
    Join Date
    24.03.2009
    Posts
    98

    Default

    Also, remember that redox needs a week to more then that to stabilize after calibration

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •