Results 1 to 4 of 4

Thread: Profilux II Light and DALI card ?

  1. #1
    Join Date
    03.12.2010
    Location
    Australia
    Posts
    12

    Default Profilux II Light and DALI card ?

    Can the Profilux II Light bar accept the PLM DALI card ?

  2. #2
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    No, it´s only for the devices with extension port, PL2+, PL3 and Expansion box [EX-Box at the moment only for regulation, but not for initial addressing].

  3. #3
    Join Date
    03.12.2010
    Location
    Australia
    Posts
    12

    Default

    Thanks, so this obviously means only 1-10v dimming is possible with Profilux II Light bar.

  4. #4
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    Thanks, so this obviously means only 1-10v dimming is possible with Profilux II Light bar.
    Unfortunately: Yes
    Description at http://aquariumcomputer.com/System__..._ii_light.html says it clear:
    Not expandable

    Additional info: With an EVG-AP-1F or EVG-AP-2F it´s possible to control 1 or 2 light bars with 1-10V and have the switch on/off without loosing a socket in the Profilux II Light bar. Unfortunately its a naked board and has to be mounted inside the lamp or a separate box - so it´s only for people with electric skills.
    Last edited by Wirus; 22.12.2010 at 14:23.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •