Firmware 5.03a BETA

[GHL Support]

...is availabe now

Solved problems:
Webserver over VPN under circumstances not available
Timer works at a rollover with a specific DOW not properly

[lalasfish]

A bit of advise before upgrading to any firmware.

Quit reefstatus or marinemad logger!!

it happened to me twice and had to upgrade firmware with the flasher program..
As i was updating through serial port one of the two loggers tried to grab data and caused a crash on the update procedure....
i have rescued my P3 using the FR program with sucess...
it happened to me twice when i upgraded to 5.02 and now to 5.03a so there must be something going on right???

cheers

christos

[Mathias-Steffen]

Yes, we recommend to close all Background Software if doing a firmware upgrade.

[Blahenazo]

maybe the ethernet port can be disabled while flashing.
(selectable option while updating => like disabling all sockets to avoid switching spike for the USB flash thingy ? )

[Blahenazo]

*double post*

[boboxx]

it would actualy be nice to be able to do firmware upgrade over the lan

[Mathias-Steffen]

The LAN Port can't be disabled - but this is not necessary, because the LAN Port isn't active during flash activity anyways.

[Blahenazo]

it happened to me twice and had to upgrade firmware with the flasher program..
As i was updating through serial port one of the two loggers tried to grab data and caused a crash on the update procedure....


christos

Then christos is lying )))) (or its something else that is causing the crash)
because he was updating via serial and loggers crasht his p3

[Mathias-Steffen]

Depends on the "loggers" - there are tools on the market, which just poll data per RS232, so he maybe is very right.

[Blahenazo]

but if he was updating the FW the serial port should have been in use ???
or what do I miss ?