Results 1 to 3 of 3

Thread: Why L2 dimms with L1 ?

  1. #1
    Join Date
    30.01.2010
    Location
    Athens
    Posts
    295

    Default Why L2 dimms with L1 ?

    O.K.
    The system:
    Profi 3ex
    Matrix 8 x 54W with 4 dimmable ballasts (2 lamps each) and 2 EVG-AP2.

    1st EVG-AP2 controls the first (1P) & third Pairs (3P) of lamps, connected to L1 &L2
    2nd EVG-AP2 controls the second (2P) & the forth Pairs (4P) of lamps connected to L5 & L6.

    The problem: when I dimm L1 both 1P & 3P dimms together. When I dimm L2, nothing happens.

    (When I dimm L5, the 2P dimms & when I dimm L6, the 4P dimms).

    So, I changed lines goes to the EVGS and this is what happens:
    When I dimm L5, the 1P dimms and when I dimm L6 the 3P dimms. But 2P & 4P dimms together when dimming L1 and nothing happens when I dimm L2.

    Changed wires between lines, some thing.

    So it is like L1 & L2 dimms together.

    No problem with connection in the Matrix or the EVGS because I can dimm 1P & 3P (when connected to L5, L6) or 2P & 4P (when connected to L5,L6).

    All boxs are ticked (dimmable etc), what should I do?

    Worlds most gadget Aquarium.. almost.

  2. #2
    Join Date
    23.07.2010
    Posts
    8

    Default

    I had the same problem with my LEDs. Check your 1-10v interfaces in ProfiluxControl. For me, I had L1 set to identical Illumination channels.

  3. #3
    Join Date
    30.01.2010
    Location
    Athens
    Posts
    295

    Default

    Quote Originally Posted by GenX View Post
    I had the same problem with my LEDs. Check your 1-10v interfaces in ProfiluxControl. For me, I had L1 set to identical Illumination channels.
    Thanks mate, that was the case with me too.

    Worlds most gadget Aquarium.. almost.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •