this is what i did.

1. switched simu cable from L5L6 to L1/L2
2. adjusted 1-10 switch from L5 to L2
3. programed the led from port L1/L2 and selected a light blue color - started
4. tested RED - works fine via timer and light scenario scenario
5. tested flash - works fine and ....
6. The flash in manual mode did fine but i could see the blue leds were n also as it flashes
7. by the way - all simulations are off - with execption of thunder

So all colours work, but i can't get the blue one on only. I've tried all the Illiumination 1-8 selections and 1-10 channels, no blue.

just a minute ago all the white lights wend and the aqua was dark and immeditely the thunderstorm started (and again, blue was running within the SIMU, however not visible in the aquarium.


Who can help