Results 1 to 9 of 9

Thread: Firmware 5.02f Bugs Report

  1. #1
    Join Date
    30.05.2010
    Posts
    38

    Default Firmware 5.02g Bugs Report

    Hello Again..

    I have been running firmware 5.02g on my profilux 3ex from the day it was available to the public...

    Since then i have not been able to see any bugs or problems with this release....

    If anyone is having any troubles please post your comments here so we can all verify and comment on them.... this way we can help deveopers fix and improve firmware ....

    Cheers

    Christos
    Last edited by lalasfish; 07.08.2010 at 18:54. Reason: corrected firmware version

  2. #2
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    Hi,

    there is still the 5.02g available due a bug in 5.02f -

    Regardless of that there is noticed in german part of the forum a big delay for web access on some PL3 - also at my one.

    Web acess needs more than 30 seconds - in-acceptable!

    After an update to PL3 eX it was better for one day - then the delay came back.
    I´ve done a downgrade and an upgrade again - now delay is approx. half a second - let´s see how long it stays that good.

    Due I do logging by an external cronjob all five minutes, my PL is frequented a little more than normal, but that shouldn´t matter i think

    Is there anyone out there with same problem?

  3. #3
    Join Date
    30.05.2010
    Posts
    38

    Default

    just corrected my mistake in writing the version number.... sorry... i meant firmware 5.02g

  4. #4
    Join Date
    17.03.2009
    Posts
    22

    Default

    I am having the same problem with 5.02g. My webserver is not responsive and I can no longer connect to it. I reset the profilux and it starts working again but only for about an hour. This never happend with previous Firmware versions.

  5. #5
    Join Date
    03.03.2009
    Posts
    81

    Default

    Quote Originally Posted by bmwaaron View Post
    I am having the same problem with 5.02g. My webserver is not responsive and I can no longer connect to it. I reset the profilux and it starts working again but only for about an hour. This never happend with previous Firmware versions.
    I have exactly the same problem.

  6. #6
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    Hi,

    I´ve done an upgrade to P3 eX and it has worked for one day and stopped again.
    Doing a downgrade and re-upgrade it has made it o.k. again. It´s working for approx. two days now.

    You can try the following (at your own risk!):

    - save all settings to a file
    - save sensor settings to a file
    - do the upgrade from menu
    - reboot (as told in the menu)
    - perform the downgrade as soon as you can connect to the P3
    - reboot again
    - restore the settings and sensor settings from file

    If you have already an eX, downgrade and re-upgrade it in a similar way (that´s what I have done).

  7. #7
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    we are aware of this problem - for some rason the webserver becomes slower, especially when having much traffic or a bad connection (e.g. WiFi)

    I hope we will find the solution soon.

    Are you using Marine Mad?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  8. #8
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    Are you using Marine Mad?
    Falls ich gemeint sein sollte: Nein, näheres unter http://www.aquariumcomputer.com/Foru...5570#post15570

    For the only english speaking ones: There is also a thread in german part of the forum about that issue

  9. #9
    Join Date
    14.10.2009
    Location
    Dubai
    Posts
    168

    Default

    Quote Originally Posted by lalasfish View Post
    Hello Again..

    I have been running firmware 5.02g on my profilux 3ex from the day it was available to the public...
    Since then i have not been able to see any bugs or problems with this release....

    If anyone is having any troubles please post your comments here so we can all verify and comment on them.... this way we can help deveopers fix and improve firmware ....

    Cheers

    Christos
    Christos,

    Yesterday i upgraded from 5.00 to firmware 5.02g on a Profilux II Ex. and all works fine however the measurement setting are not recorded. I approuch my profilux true LAN.
    As soon as i highlite all values and save nottings happens? As soon as i klick load all highlichts of values disapere? Also i can´t transmit all setting of my profilux to a file? Transmit all sensor settings works fine?


    Does the 5.02H firmware solve this and when is this firmware going to be released for profilux II EX? Or do i have to go back to 5.00 (is this possible)??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •