Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: 10V port schematic

  1. #21
    Join Date
    05.06.2017
    Posts
    25

    Default

    I am a mechanical guy and really not good at electrical stuff. I have a RD5 controller, from the manual it said it can do 0-10V adjustment, using a earphone plug with the attached connection plug.jpg
    Am I correct that I should connect the "Positive - Segment 1" to Pin 2 and "Negative - Segment 3" to Pin 3 of the RJ12 connector? Thanks.

    Kary

  2. #22
    Join Date
    10.10.2013
    Posts
    994

    Default

    Quote Originally Posted by Karytse View Post
    I am a mechanical guy and really not good at electrical stuff. I have a RD5 controller, from the manual it said it can do 0-10V adjustment, using a earphone plug with the attached connection plug.jpg
    Am I correct that I should connect the "Positive - Segment 1" to Pin 2 and "Negative - Segment 3" to Pin 3 of the RJ12 connector? Thanks.

    Kary
    Yes

  3. #23
    Join Date
    05.06.2017
    Posts
    25

    Default

    Thanks.
    I made one using a RJ11 connector, but doesn't seems to working. Just wanted to be sure about the pin assignment, is this how it should be connected? The black cable goes to the "Positive - Segment 1" and white to the "Negative - Segment 3"?

    20180623_103955.jpg

  4. #24
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Pin2 Profilux--->Pin1 + connector
    Pin3 Profilux--->Pin3 - connector

    Pin2 Profilux, if you want to use L1,L3,L5 etc.
    Pin5 Profilux, if you want to use L2,L4,L6 etc.
    But please use an RJ12 connector, and use the right cable for RJ12 6/6 wiring.
    Then you have to assign the interfaces under 1-10V settings to the pumps


    Steckerbelegungen des ProfiLux.pdf


    Regards Pit

  5. #25
    Join Date
    05.06.2017
    Posts
    25

    Default

    Thanks Gael and Pit. Will try yo find a proper connector for this. Just to make sure I am correct on the pin assignment, on this picture 20180623_103955.jpg, is the left most pin the Pin 1?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •