Upstart of Brezzer and need some help

[Maack]

Someone there can help me with the reason for that I am not able to change the numbers in: "1-10V Output is maximum at deviation of"
In Socket funcktion I have it in S5, Temp 1, chiller.
In 1-10 interfaces I use L3, temp.1 controller.
I have connectedthe brezzer in L3L4 back on the GHL.
What am I doring wrong ?

[Maack]

bump bump bump

[Matthias]

we don't understand the question

[Maack]

Ok I have try on another way :-)

I am only able to start my Probelle manually despite the fact that I have a propeller Control 2.1

I have connected the DC plug to S5 in my powerbar and the propelle into the "controller", from there into L5 port. But by this way nothing happens.

Extra question: Can I connect two propeller units, including two propeller control in a YL2 splitter and manage that via the GHL ?

I hope you understand it :-)


Regards,
Henrik

[Matthias]

the power adaptor has to be plugged into a socket with permanent power and L5 must have the function "temp 1"

you can connect 2 PropellerControl using a splitter

[Maack]

Thanks a lot Matthias, now it work