Upstart of Brezzer and need some help

[Maack]

Someone there can help me with the reason for that I am not able to change the numbers in: "1-10V Output is maximum at deviation of"
In Socket funcktion I have it in S5, Temp 1, chiller.
In 1-10 interfaces I use L3, temp.1 controller.
I have connectedthe brezzer in L3L4 back on the GHL.
What am I doring wrong ?

[Maack]

bump bump bump

[Matthias]

we don't understand the question

[Maack]

Ok I have try on another way :-)

I am only able to start my Probelle manually despite the fact that I have a propeller Control 2.1

I have connected the DC plug to S5 in my powerbar and the propelle into the "controller", from there into L5 port. But by this way nothing happens.

Extra question: Can I connect two propeller units, including two propeller control in a YL2 splitter and manage that via the GHL ?

I hope you understand it :-)


Regards,
Henrik

[Matthias]

the power adaptor has to be plugged into a socket with permanent power and L5 must have the function "temp 1"

you can connect 2 PropellerControl using a splitter

[Maack]

Thanks a lot Matthias, now it work

[Maack]

How can it be that the temperature was 23.9 degrees this morning in the tank, when GHL'n is set to 25 degrees, the propeller still driving at full when the temperature was 23.9. How do I fix that ?.

Regards,

Henrik

[Matthias]

please show us your settings

screenshots of the 1-10V-settings and of the temperature settings

[Maack]

Hi Matthias

I have some problems with copy/paste so I can send the screenshots. I will get some help to that and return to you.

Regards,

Henrik

[Matthias]

when you want to add pictures in the forum:
use the button "go advanced" and then add attachments