First, does the stand-alone doser have any connections with the Controller and if so, can commands from the Controller or PC change the setting on the stand-alone, (can you network them like the controllers?)
Second, does each pump us its on plug.
First, does the stand-alone doser have any connections with the Controller and if so, can commands from the Controller or PC change the setting on the stand-alone, (can you network them like the controllers?)
Second, does each pump us its on plug.
Herr Dr. iur. WESheltonJ
GHL Proflilux 3 eX, w/ (2) Digital Power bars, GHL Temp, Salinity, & ORP Probes, AD pH Probe & AI LED light
no, the standalone dosing unit has no interface which can be connected with ProfiLux.
The present interface is only to control a second standard dosing unit (without controller)
I don`t understand the second question
Sorry for the typo in the second part.
Should be: Does each pump, require its on power plug. ie 1 pump one plug, 4 pumps four plugs?
Will the III be able to be linked? or still to just another stand-alone?
Last edited by wesheltonj; 22.02.2009 at 18:16.
Herr Dr. iur. WESheltonJ
GHL Proflilux 3 eX, w/ (2) Digital Power bars, GHL Temp, Salinity, & ORP Probes, AD pH Probe & AI LED light
the dosing unit has one input for an AC/DC-adaptor - was this the question?
The standalone unit can not be controlled or adjusted by another controller - it is just "standalone" with its own integrated controller
There is only one power line for the dosers both stand alone and modular
The pumps are controlled via the western connection back to the ProfiLux
The Stand alone doser will always and only ever be a stand alone and not be linked or controlled by the ProfiLux Plus II PIII or PIV
If you want to control a doser by the ProfiLux you need the modular doser range by GHL.
Bookmarks