Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Renaming "Menu Titles"

  1. #1
    Join Date
    15.05.2010
    Location
    Waynesville, North Carolina USA
    Posts
    463

    Default Renaming "Menu Titles"

    Ok I may be using the wrong "term" up there in my Threat Title but I can't remember exactly what their labeled as..... what I'm wanting to do is to rename things like:

    • Illumination #1 to White/Blue LEDS
    • Illumination #2 to Red/Orange LEDS
    • Illumination #3 to T5's
    • Illumination #4 to MH's
    • Illumination #5 to Fuge Lights


    on the Screen when viewing the Controller and on the PC when using the software.

    So the "Scrolling" screen would show something like
    (this is my mid-evening scenario with my lights

    • White/Blue LEDS at 90%
    • Red/Orange LEDS at 20%
    • T5's at 100%
    • MH's at 100%
    • Fuge Lights at 0%


    Is it possible to rename these for the VIEW SCREEN(s) only?

  2. #2
    Join Date
    10.03.2009
    Posts
    478

    Default

    I would like to have the comment be displayed and stored on the Profilux so that it's portable and not static on the computer that was used to setup the Profilux.

    Would the comment field work for you in this case or do you use the comment field for something else?

  3. #3
    Join Date
    15.05.2010
    Location
    Waynesville, North Carolina USA
    Posts
    463

    Default

    Quote Originally Posted by boboxx View Post
    I would like to have the comment be displayed and stored on the Profilux so that it's portable and not static on the computer that was used to setup the Profilux.

    Would the comment field work for you in this case or do you use the comment field for something else?

    Is this for me? If so I'm lost (what's new right?). . .

  4. #4
    Join Date
    10.03.2009
    Posts
    478

    Default

    heheh ya it was for you BigAl,

    In PLC you can have comments, so you could set :
    Illumination #1 to White/Blue LEDS
    Illumination #2 to Red/Orange LEDS
    Illumination #3 to T5's
    Illumination #4 to MH's
    Illumination #5 to Fuge Lights

    in the comments field and then disply the comment field istead of the "real" name like Illumination #X. Matthias told me that this feature was going to be included in the next release.

    C.

  5. #5
    Join Date
    15.05.2010
    Location
    Waynesville, North Carolina USA
    Posts
    463

    Default

    Quote Originally Posted by boboxx View Post
    heheh ya it was for you BigAl,

    In PLC you can have comments, so you could set :
    Illumination #1 to White/Blue LEDS
    Illumination #2 to Red/Orange LEDS
    Illumination #3 to T5's
    Illumination #4 to MH's
    Illumination #5 to Fuge Lights

    in the comments field and then disply the comment field istead of the "real" name like Illumination #X. Matthias told me that this feature was going to be included in the next release.

    C.
    Ahh gotcha... I'll be watching for that in the next release then. That's exactly what I was looking for. Hopefully it wont be long now

    Thank you!!

  6. #6
    Join Date
    12.05.2010
    Posts
    343

    Default

    has this happened yet?

  7. #7
    Join Date
    08.06.2011
    Posts
    10

    Default Does this work yet?

    Hey guys, has anyone heard about whether or not this is possible yet? I see the spot where you can rename it in the "discription Profiluxcontrol", which is editable, and then next to it is the "discription in profilux" but this field is not changeable?
    Any help would be fantastic.
    thanks

  8. #8
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    Hey guys, has anyone heard about whether or not this is possible yet?
    It is.
    but this field is not changeable?
    You need PL firmware 5.0.9 and PLC 5.0.9.1

  9. #9
    Join Date
    08.06.2011
    Posts
    10

    Default

    thank you

  10. #10
    Join Date
    14.10.2009
    Posts
    86

    Default

    I'm confused, I have PLC 5.0.9.1 and FW 5.0.9 and I can change both the description in Profilux Control and Profilux but I can only see the "Illumination x" under viewable elements within the Display options - am I missing something? Andy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •