Control Heater and fans

[pedrocho]

Hi!

I've the ProfiLux 3 EX, and i would like to control the heaters and the fans!

I would like that the ProfiLux do this:
When the temperature drops turns on the heaters until it reaches 25 º C(at 25ºC the heaters turn off).

The fans must work when the temperature reaches 28 º C, below 28 º C they turn off.

Is this possible to do ? I've a 6D power bar!

Another thing, in the temperature screen i dont have any temperature at all!

Is this normal? The firmware version is 5:00:01

Regards

[Matthias]

of course this is possible, set the temp. to 25°C and set the sockt functions to temp.1 heat, resp. temp.1 cool
set also the cooling difference for approx. 2 °C
-> more information regarding this in the manual

what does this mean

in the temperature screen i dont have any temperature at all!

[pedrocho]

Hi!

Now i have temperature....but i only have the heaters working...the fans didnt work....(i already program the power bar)

By the way, to connect the CO2 (PH2 at 6,5) and the Redox (400mv) what i have to do?

Another thing, loool, sorry, i have the Profilux Simu L, and my lights only opens at 22h (fotoperid inverted), how can i program the moonlight?

Sorry if i have too many questions at the same time...

Regards

[Matthias]

better we stay on one topic, please open additional threads for other problems, support is otherwise very difficult

when the heaters work the cooling must work accordingly

what are you socket and temperature settings exactly? screenshots are welcome