Seite 2 von 2 ErsteErste 12
Zeige Ergebnis 11 bis 13 von 13

Thema: 5.0.1 update killed profilux III

  1. #11
    Registriert seit
    19.02.2009
    Beiträge
    2.977

    Standard

    The jumper pins on the ProfiLux 3 is for a reset. If you set a jumper the ProfiLux permanently stays in reset state!

    Recovering the firmware with "Flash-FR" is possible only via ProfiLux RS232 port (direct over ProfiLux-ser or with an USB to serial adapter) as menioned in
    http://www.aquariumcomputer.com/Foru...ead.php?t=1274

    "Error No.006 Unable to open com port" occures if your COM port is used by an other application (maybe ProfiLuxControl still open) or doesn't exist (wrong COM port selected in "Set Environment").

  2. #12
    Registriert seit
    21.02.2010
    Beiträge
    6

    Standard success

    After reading your statement and re-reading the instructions again. I finally figured out the step that started the process. I have the system up and running. My problem in not totally understanding the instructions that make sense LOL

    On another note, I would like to add that support rocks and the system rocks as well. I spent thousands on the neptune system and apex systems that were so unreliable i could not trust anything with the system, especially pumps.

    I have yet to have a problem with the ProfiLux, its proven to be reliable and fun at the same time. thanks again _macfishy

  3. #13
    Registriert seit
    07.06.2009
    Beiträge
    738

    Standard

    Zitat Zitat von macfishy Beitrag anzeigen
    After reading your statement and re-reading the instructions again. I finally figured out the step that started the process. I have the system up and running. My problem in not totally understanding the instructions that make sense LOL

    On another note, I would like to add that support rocks and the system rocks as well. I spent thousands on the neptune system and apex systems that were so unreliable i could not trust anything with the system, especially pumps.

    I have yet to have a problem with the ProfiLux, its proven to be reliable and fun at the same time. thanks again _macfishy

    I have the same feeling about the controller and support with this product. Support /stability is top notch. Running beta software from the beginning but I never had any problem with the 'core' features. Only stuff that you have to be 'aware' off because its beta.

    prolly the beta software of GHL is more stable that software of other vendors , This week I've red something about aquatronica , a guy bought a second hand old unit, but aquatronica-support couldn't tell him if he would be able to upgrade the fw if he bought the upgrade cable. How can you make a product and not knowing if you can flash the device ?
    If I red that I just smiled @ my profilux

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •