So i guess its just us then
So far: transmission totals:54530 and 0- failed!
So far thats the best i ever had with p3
just updated with serial/usb convertor and had no problems.
This FW was not destructive @ all. PAB was still configured + sensors calibrated. just reloaded parameters from file just to be sure.
just want to post my latest attempt to upgrade from "o" to "p" via GHL supplied USB cable
Yep
Until updates are available over LAN please use either a serial cable OR the Flash tool, my personal preference is the flash tool.
USB to USB is unstable and should not be used.
However the good news is "P" eliminates the drop out issues in most cases, of course this is dependant on your home network being stable in the first place
I have used all three ways to update to firmware "p": usb to usb, usb to serial, and flasher. Flasher is a great program and was alway rock solid. Usb to serial is also stable and rock solid. I have not been able to use the usb to usb once for "p." I have tried at least three times. Each time that the program gets to the point in the updating of the firmware where the profilux 3 is shut down, the usb to usb loses connection or communication. I am wondering if somewhere the things getting turned off is including something connected to the usb port on the p3. Just my two cents.
Ken
By the way I love firmware "p."
Ken
thanks to all for the feedback
we and other users have never problems while updating over onboard USB, other users have this problems in most cases
I guess this is a driver or windows problem
next week we will examine this issue closer
I have just tried mine and yes it fails at exactly the point the Power bar gets switched off.
There are two threads running with the same topic right now, more info can be found here
http://www.aquariumcomputer.com/Foru...1470#post11470
Great walk through feedback, i think this has really helped find a swift solution.
Last edited by aqua_digital; 04.04.2010 at 12:51.
Bookmarks