Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30

Thread: ProfiLuxControl 5.0.0.12 and firmware 5.00p

  1. #21
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    So i guess its just us then


    GHL ProfiLux Canada/USA Distribution and support

  2. #22
    Join Date
    13.03.2009
    Location
    new york
    Posts
    255

    Default

    So far: transmission totals:54530 and 0- failed!

    So far thats the best i ever had with p3

  3. #23
    Join Date
    07.06.2009
    Posts
    738

    Default

    just updated with serial/usb convertor and had no problems.

    This FW was not destructive @ all. PAB was still configured + sensors calibrated. just reloaded parameters from file just to be sure.

  4. #24
    Join Date
    20.02.2010
    Posts
    18

    Default

    just want to post my latest attempt to upgrade from "o" to "p" via GHL supplied USB cable


  5. #25
    Join Date
    21.11.2009
    Posts
    18

    Default

    Same error here.
    I alwayes try Profiluxcontrol first, but ending up with FR to recover.

    Alwayes uses seriel connection when uploading new firmware.

    /Bigman

  6. #26
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    Yep

    Until updates are available over LAN please use either a serial cable OR the Flash tool, my personal preference is the flash tool.

    USB to USB is unstable and should not be used.

    However the good news is "P" eliminates the drop out issues in most cases, of course this is dependant on your home network being stable in the first place


    GHL ProfiLux Canada/USA Distribution and support

  7. #27
    Join Date
    23.01.2010
    Location
    Tyler, Texas USA
    Posts
    53

    Default

    I have used all three ways to update to firmware "p": usb to usb, usb to serial, and flasher. Flasher is a great program and was alway rock solid. Usb to serial is also stable and rock solid. I have not been able to use the usb to usb once for "p." I have tried at least three times. Each time that the program gets to the point in the updating of the firmware where the profilux 3 is shut down, the usb to usb loses connection or communication. I am wondering if somewhere the things getting turned off is including something connected to the usb port on the p3. Just my two cents.

    Ken

  8. #28
    Join Date
    23.01.2010
    Location
    Tyler, Texas USA
    Posts
    53

    Default

    By the way I love firmware "p."

    Ken

  9. #29
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    thanks to all for the feedback

    we and other users have never problems while updating over onboard USB, other users have this problems in most cases
    I guess this is a driver or windows problem

    next week we will examine this issue closer

  10. #30
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    I have just tried mine and yes it fails at exactly the point the Power bar gets switched off.

    There are two threads running with the same topic right now, more info can be found here

    http://www.aquariumcomputer.com/Foru...1470#post11470

    Great walk through feedback, i think this has really helped find a swift solution.

    Last edited by aqua_digital; 04.04.2010 at 12:51.


    GHL ProfiLux Canada/USA Distribution and support

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •