Results 1 to 9 of 9

Thread: Problem after upgrading to 2.0 , no connection with Profilux

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    13.03.2009
    Location
    new york
    Posts
    255

    Default Problem after upgrading to 2.0 , no connection with Profilux

    Just did upgrade to 2.0 and i cannot connect SMS to Profilux.
    PFC wouldnt connect to profilux and i see erro 1 on View screen. Soon as i uncheck "seach for SMS" i have no problem to connect with profilux.
    I did twice and still the same errow.

  2. #2
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    please give us all details about your complete system

    as far as I know you have quite a complicated setup (RS485? 2 ProfiLux on one SMS unit? View? Where is connected what?)

  3. #3
    Join Date
    13.03.2009
    Location
    new york
    Posts
    255

    Default

    Profilux3 with ex box with latest updated version.
    SMS connected via RS the same way as i have with pII.
    P3 connected via LAN at the moment , but i have try with USB just to check SMS and i have the same problem.

    P3/ex.box--SMS---view

  4. #4
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    Hello

    I've tested the connection with my ProfiLux3eX + ExpansionBox with the SMS module (connected to ProfiLux RS232).

    I can't reproduce the Problems you described here.

    Tested with PLC 5.0.0.11 and ProfiLux3eX (FW 5.00o/5.00p) via onboard RS232, USB and LAN.

    Things to check:
    - SMS module connected properly with the correct serial cable to the ProfiLux RS232
    - The cable isn't damaged in any way
    - The power supply on the SMS module connected and Supply LED is on
    - The SMS module is switched on and Power LED is on and Status LED don't show a hardware error

    An other question: is a ProfiLux View connected to the SMS module? It isn't clear for me...

  5. #5
    Join Date
    13.03.2009
    Location
    new york
    Posts
    255

    Default

    HEllo,

    I will double check everything one more time and will do upgrade as well.
    cable doent look damage at all, i didnt have any problems with P2.

    How can i see if status LED shows error? Different color ? Status LED is staty yellow

    View connected to SMS and i am getting error 1


    mike
    Last edited by mshur; 30.03.2010 at 14:16.

  6. #6
    Join Date
    13.03.2009
    Location
    new york
    Posts
    255

    Default

    I didnt do a upgrade one more time, but i reconected SMS and i have all SM blinking and i cannot connect with Profilux via LAN. PCT trying to reconnect a few times and i am getting error 28. I will do other upgrade after work.
    While upgrading do i have to plug power supplly or i can use battery in SMS module?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •