Zeige Ergebnis 1 bis 9 von 9

Thema: Problem after upgrading to 2.0 , no connection with Profilux

  1. #1
    Registriert seit
    13.03.2009
    Ort
    new york
    Beiträge
    253

    Standard Problem after upgrading to 2.0 , no connection with Profilux

    Just did upgrade to 2.0 and i cannot connect SMS to Profilux.
    PFC wouldnt connect to profilux and i see erro 1 on View screen. Soon as i uncheck "seach for SMS" i have no problem to connect with profilux.
    I did twice and still the same errow.

  2. #2
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.637

    Standard

    please give us all details about your complete system

    as far as I know you have quite a complicated setup (RS485? 2 ProfiLux on one SMS unit? View? Where is connected what?)

  3. #3
    Registriert seit
    13.03.2009
    Ort
    new york
    Beiträge
    253

    Standard

    Profilux3 with ex box with latest updated version.
    SMS connected via RS the same way as i have with pII.
    P3 connected via LAN at the moment , but i have try with USB just to check SMS and i have the same problem.

    P3/ex.box--SMS---view

  4. #4
    Registriert seit
    19.02.2009
    Beiträge
    2.976

    Standard

    Hello

    I've tested the connection with my ProfiLux3eX + ExpansionBox with the SMS module (connected to ProfiLux RS232).

    I can't reproduce the Problems you described here.

    Tested with PLC 5.0.0.11 and ProfiLux3eX (FW 5.00o/5.00p) via onboard RS232, USB and LAN.

    Things to check:
    - SMS module connected properly with the correct serial cable to the ProfiLux RS232
    - The cable isn't damaged in any way
    - The power supply on the SMS module connected and Supply LED is on
    - The SMS module is switched on and Power LED is on and Status LED don't show a hardware error

    An other question: is a ProfiLux View connected to the SMS module? It isn't clear for me...

  5. #5
    Registriert seit
    13.03.2009
    Ort
    new york
    Beiträge
    253

    Standard

    HEllo,

    I will double check everything one more time and will do upgrade as well.
    cable doent look damage at all, i didnt have any problems with P2.

    How can i see if status LED shows error? Different color ? Status LED is staty yellow

    View connected to SMS and i am getting error 1


    mike
    Geändert von mshur (30.03.2010 um 15:16 Uhr)

  6. #6
    Registriert seit
    13.03.2009
    Ort
    new york
    Beiträge
    253

    Standard

    I didnt do a upgrade one more time, but i reconected SMS and i have all SM blinking and i cannot connect with Profilux via LAN. PCT trying to reconnect a few times and i am getting error 28. I will do other upgrade after work.
    While upgrading do i have to plug power supplly or i can use battery in SMS module?

  7. #7
    Registriert seit
    19.02.2009
    Beiträge
    2.976

    Standard

    The manual of the SMS module (site 3) describes the states of the status LED...
    If the status LED is yellow (without blinking) the SMS module is ready.

    Is the Power LED on?
    Is the Supply LED on?

    You can't update the SMS module without the power supply...

  8. #8
    Registriert seit
    13.03.2009
    Ort
    new york
    Beiträge
    253

    Standard

    All lights are ON..

    I will do other upgrade and see, last time i did upgrade without power supplly .maybe that cause a problem, we shall see

  9. #9
    Registriert seit
    13.03.2009
    Ort
    new york
    Beiträge
    253

    Standard

    Got it all working!!!

    I have no idea what was it, but i disconnect all cables , did other upgrade and Bingo! I think it might be a connection problem somewhere.

    Thanks Profilux team !

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •