Seite 1 von 2 12 LetzteLetzte
Zeige Ergebnis 1 bis 10 von 46

Thema: Solving connection problems

Hybrid-Darstellung

  1. #1
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.644

    Idee Solving connection problems

    with the newest firmware (5.00n and higher) and the new ProfiLuxControl (5.0.0.11 and higher) we were able to increase the speed and reliability in most cases - but in some cases this produced problems in some environments

    I think the reason is that some PCs have problems with the high speed connection - but there is a simple solution:
    It is possible to activate a delay in ProfiLuxControl:
    Edit the connection settings -> set the checkmark "RS485 delay"

    RS485-Delay.jpg

    this should be done only if there are connection problems - otherwise it should left unchecked in order to obtain the maximum connection speed

  2. #2
    Registriert seit
    18.01.2010
    Beiträge
    34

    Standard

    RS485 delay worked - quick connection and response within program!

    Thank You

  3. #3
    Registriert seit
    19.02.2009
    Ort
    MANOTICK
    Beiträge
    866

    Standard

    Quote from RC

    "I received a response from Matthias - download 5.00o firmware. But according to download site, that is for the Pro 3, is it not? I own a Pro II. And he also provided the link below, which I believe requires firmware version 5.00o to be installed? "

    Answer - From the download list for Plus II Version 5.0m is the latest firmware and 5.011 software.


    GHL ProfiLux Canada/USA Distribution and support

  4. #4
    Registriert seit
    18.01.2010
    Beiträge
    34

    Standard

    Thank you - issue resolved using the RS485 solution.

  5. #5
    Registriert seit
    13.03.2009
    Ort
    new york
    Beiträge
    255

    Standard

    Matthias,
    This is only for USB/RS connection, but what about LAN?


    mike

  6. #6
    Registriert seit
    01.03.2010
    Beiträge
    72

    Standard

    Just a FYI Michael. I have read that and it does nothing clicked or un clicked. No difference I have downloaded both drivers for both chipsets and still connection issues.

  7. #7
    Registriert seit
    30.06.2013
    Beiträge
    111

    Standard

    You can reset to factory defaults on the Profilux unit. Remember to backup first ;-)

  8. #8
    Registriert seit
    29.06.2012
    Ort
    Fraserburgh
    Beiträge
    15

    Standard

    done that... I can see the profilux, but it wont connect in the software.... even resorted to updating the flash file with Lantronix software... I must be missing something really easy...

  9. #9
    Registriert seit
    30.06.2013
    Beiträge
    111

    Standard

    Strange. Try to reinstall GCC. Have you tried to connect with USB and LAN? Are you using the latest GCC?

  10. #10
    Registriert seit
    24.01.2011
    Ort
    Bohus, Sweden
    Beiträge
    184

    Standard

    He can´t use the Controll Center software because is not suitable for Profilux II as I understand it

    Sincerely Lasse

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •