Page 1 of 5 123 ... LastLast
Results 1 to 10 of 46

Thread: Solving connection problems

  1. #1
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Idee Solving connection problems

    with the newest firmware (5.00n and higher) and the new ProfiLuxControl (5.0.0.11 and higher) we were able to increase the speed and reliability in most cases - but in some cases this produced problems in some environments

    I think the reason is that some PCs have problems with the high speed connection - but there is a simple solution:
    It is possible to activate a delay in ProfiLuxControl:
    Edit the connection settings -> set the checkmark "RS485 delay"

    RS485-Delay.jpg

    this should be done only if there are connection problems - otherwise it should left unchecked in order to obtain the maximum connection speed

  2. #2
    Join Date
    18.01.2010
    Posts
    34

    Default

    RS485 delay worked - quick connection and response within program!

    Thank You

  3. #3
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    Quote from RC

    "I received a response from Matthias - download 5.00o firmware. But according to download site, that is for the Pro 3, is it not? I own a Pro II. And he also provided the link below, which I believe requires firmware version 5.00o to be installed? "

    Answer - From the download list for Plus II Version 5.0m is the latest firmware and 5.011 software.


    GHL ProfiLux Canada/USA Distribution and support

  4. #4
    Join Date
    18.01.2010
    Posts
    34

    Default

    Thank you - issue resolved using the RS485 solution.

  5. #5
    Join Date
    13.03.2009
    Location
    new york
    Posts
    255

    Default

    Matthias,
    This is only for USB/RS connection, but what about LAN?


    mike

  6. #6
    Join Date
    01.03.2010
    Posts
    72

    Default

    Just a FYI Michael. I have read that and it does nothing clicked or un clicked. No difference I have downloaded both drivers for both chipsets and still connection issues.

  7. #7
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    Hi

    Can you let me know these answers

    What firmware version?
    What software version?
    ProfiLux 3?
    Are you connecting USB to USB or USB to RS232?


    GHL ProfiLux Canada/USA Distribution and support

  8. #8
    Join Date
    01.03.2010
    Posts
    72

    Default

    PII and the latest software/firmware is loaded. USB to USB also. What's a better more stable connection route?

  9. #9
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    LAN is the best


    GHL ProfiLux Canada/USA Distribution and support

  10. #10
    Join Date
    01.03.2010
    Posts
    72

    Default

    LOL I just sold 1 for $50.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •