Results 1 to 3 of 3

Thread: Wlan

  1. #1
    Join Date
    27.03.2009
    Posts
    9

    Default Wlan

    Hi there,

    I have a problem setting a Ip adr on the profilux.

    If i connect through profiluxcontrol I can see the wlan card, and then i change the IP and ssid... when I press save, the display on the profilux is displaying "reset module" the same thing happens if i change the ip directly on the profilux.. but no changes has been made on it :mad:

    Someone have a good answer?

  2. #2
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    You never get an Information on witch IP or SSID the W-Lan module is right now on Profilux oder Control. It is only a one way communication possible at this point. If you set an special IP and SSID and the module is resetting the Modul has the special IP and SSID.

  3. #3
    Join Date
    20.02.2009
    Posts
    41

    Default

    Take a look at this
    http://www.aquariumcomputer.com/Foru...?p=713#post713

    Alos one question, are you running "Mixed mode BNG" on your router?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •