-
Tunze 6055 not working as expected
HI There,
I have a tunze 6055, I have set my pump and voltage settings, but all it does is turn the pump on for 1 second every 30, I was expecing a sine wave flow.
Unplugging Tunze1 cable from L1/2 socket returns pump to standard constant on as per voltage setting (im using 12v as I dont need massive flow).
Can you help? Settings below.
Paul
Last edited by Paul; 18.03.2010 at 23:44.
Reason: additional info
-
I wonder why 0% is displayed for state of pump 1 - it should be something between 10% and 100% according to your settings
is there a feed pause active?
Firmwareversion? ProfiLux model? ProfiLuxControl version?
-
I have a profilux plus II, it running the latest firmware 5.00 (dated 110210) and the latest control program.
As far as I know no feed timer is active, in that I have not pressed Escape and certianly more than 5 mins has eleasped while testing (more like 5 hours).
I have never seen the 'state' change.
Thanks for the support, is there anything I can try?
Paul
-
what are the current pump settings regarding feed pause?
try "not involved"
-
I'll check tongiht and report back, thanks for the tip
Paul
-
That did the trick!
Thank you so much
Paul
-
it seems the feed pause is activated somewhere
-> check your timer settings
-
Youre quite correct, had a rouge timer from when I was playing, deleted it and now everything is fully functional
Thanks!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks