Temperature Display

[steviek]

Having trouble getting the temperature to display on the device screen and through the web. The temperature is fine within the application.

i have clicked the appropriate box within the application

wondering what i have done incorrect

[Matthias]

after setting the correct check mark and saving this under "display" you should see it

[Tom R]

I see my temp on the main ProfiLux Display. I do not see my temp on the remote display.

Tom R

[Matthias]

what is the remote display?

ProfiLux view?

[Tom R]

My PC connected on via RS232 connection.

[Matthias]

I guess it is printed in the third line
-> remote control is working for PII, for P3 not for all lines -> comes in one of the next updates

[Tom R]

The remote view also show that it is in ALARM mode yet the ProfiLux does not show an ALARM at this time. I have checked all connections and there is no ALARM present, yet the remote view shows one.

Tom R

[Blahenazo]

I guess it is printed in the third line
-> remote control is working for PII, for P3 not for all lines -> comes in one of the next updates

if it's a P3 its normal , on my remote control in PLC on my P3 it's also an alarm

[Tom R]

I am confused.

Will this be fixed?

The remote view should only show an ALARM if the ProfiLux screen shows an ALARM and there is an actual Alarm.

Tom R

[Blahenazo]

I agree but if its on the remote PLC then I'm quite sure Mathias also knows this

But Mathias said it will be fixed in the future.
We just need to have some patiences.