tunze nano wave box control

[ahellary]

hi

i have a nano wave box and a wave box kit but im unsure ho to control this from the p3ex

please advise ... only got the p3 yesterday

tony

[Matthias]

go to the pump section, do the settings as you like

then assign function "current pump x" to the 1-10V-interface which is connected to the pump

[ahellary]

hi mathes
by doing that does the pump run in each direction for a very short time as it needs to be set in .01 of seconds to create the wave?

tony a very new p3 owner

[Matthias]

how is the Wavebox connected to the ProfiLux?

[ahellary]

hi mattheis

as yet its not connected i got a wave box connection kit wich is 1 x y splitter and 1 each tunze 1 and 2 cables

theres no instructions on how to set this up

tony

[Matthias]

if you have only one controllable pump you don't need the splitter
just plug one end of the cable into the ProfiLux (chose L-port, e.g. L1L2), the other end into the Tunze power driver