hi
i have a nano wave box and a wave box kit but im unsure ho to control this from the p3ex
please advise ... only got the p3 yesterday
tony
hi
i have a nano wave box and a wave box kit but im unsure ho to control this from the p3ex
please advise ... only got the p3 yesterday
tony
go to the pump section, do the settings as you like
then assign function "current pump x" to the 1-10V-interface which is connected to the pump
hi mathes
by doing that does the pump run in each direction for a very short time as it needs to be set in .01 of seconds to create the wave?
tony a very new p3 owner
how is the Wavebox connected to the ProfiLux?
hi mattheis
as yet its not connected i got a wave box connection kit wich is 1 x y splitter and 1 each tunze 1 and 2 cables
theres no instructions on how to set this up
tony
if you have only one controllable pump you don't need the splitter
just plug one end of the cable into the ProfiLux (chose L-port, e.g. L1L2), the other end into the Tunze power driver
Bookmarks