Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: AI LED new model not following Profilux program

  1. #11
    Join Date
    01.05.2010
    Location
    Lombard
    Posts
    43

    Default

    Yes that's the first thing I tried.didn't work I am waiting for the new cable to try out. I hope it works otherwise I don't know what the problem is.

    the serial port seems fine I was able to update the firmware with it.

    We'll see


    Quote Originally Posted by Matthias View Post
    are we talking about newest firmware and ProfiLuxControl?

    did you try "old" and "new" model for AI?

  2. #12
    Join Date
    17.08.2009
    Posts
    132

    Default

    Quote Originally Posted by Matthias View Post
    are we talking about newest firmware and ProfiLuxControl?

    did you try "old" and "new" model for AI?
    Mattias,

    I have been working with this gentleman for a couple of days trying to sort this issue out and I'm stumped. At first I suspected that the Moonphase simulation was overriding the programmed Dim curves, but the light does not respond to Manual control under either (in either "old" or "new" settings).

  3. #13
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    checklist:
    - newest firmware and newest ProfiLuxControl used?
    - tested model "old" and "new"?
    - assignment of illumination channels to blue and white ok?

    hint: if you used the RS232 to connect to PC then the AI communication will be stopped (otherwise there would be a transmission conflict)
    -> solution: connect AI, confirm AI settings on the ProfiLux directly, AI communication will be restarted

  4. #14
    Join Date
    01.05.2010
    Location
    Lombard
    Posts
    43

    Default

    Well The AI Connection cable goes to RS232 there shouldn't have the transmission conflict to worry about.

    if it's a communication problem, it might be the Channel settings maybe.. I just left 1 and 2 for White and Blue.

    Is there anything I can try on channel settings before the new cable comes?

    Thanks

    Quote Originally Posted by Matthias View Post
    checklist:
    - newest firmware and newest ProfiLuxControl used?
    - tested model "old" and "new"?
    - assignment of illumination channels to blue and white ok?

    hint: if you used the RS232 to connect to PC then the AI communication will be stopped (otherwise there would be a transmission conflict)
    -> solution: connect AI, confirm AI settings on the ProfiLux directly, AI communication will be restarted
    Last edited by wcho; 19.05.2010 at 21:27.

  5. #15
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    you can't do more than assigning channels 1 and 2 to blue and white and then change the brightness manually - the lamp must react then

  6. #16
    Join Date
    06.07.2011
    Location
    england
    Posts
    26

    Default

    did you ever get to the bottom of the problem. i have profilux 3 ex and ai lighting i dont have a clue how to programme lighting and because there is only one rs232 port does this mean after programming lights, while the lights are running they have to be plugged into profilux? and if i then want to control profilux on the pc for anything else id have to plug out lighting then connect profilux to pc? is this correct. and can somebody help me with programming lights schedual

  7. #17
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    Then add PLM-RS232 interface card


    GHL ProfiLux Canada/USA Distribution and support

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •