Results 1 to 2 of 2

Thread: pH Control

  1. #1
    Join Date
    15.05.2024
    Posts
    2

    Ausrufezeichen pH Control

    I am trying to set up pH control with the Profilux 4 using CO2. I am only interested in lowering the pH. The current setup has a solenoid that activates when the pH gets too high. The logic is set up as a cycle but this method overshoots and too much CO2 is added, dropping the CO2 too low.

    I can possibly add a regulator to the CO2 to lower the amount coming in, however, this is added cost. Could this be changed in the logic to have the solenoid open for 3 seconds and then stay closed for 30 seconds to a minute before it opens again?

  2. #2
    Join Date
    12.04.2015
    Posts
    368

    Default

    Combine a timer with PH control via programmable logic

    Set the valve socket to Programmable Logic 1
    Logic 1 on the function and
    Control inputs on timer 1 and PH depreciation

    You set Timer 1 to the on/off variant with appropriate time regulations.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •