Results 1 to 2 of 2

Thread: Powerbar 6E issue

  1. #1
    Join Date
    07.05.2017
    Posts
    8

    Default Powerbar 6E issue

    Hello, I am getting some random issues with my powerbar.
    I get an alarm message saying PABCOM as a txt alert.

    Also all the devices on that powerbar go off randomly. I have tried replacing the cable to it and also running the cable to the powerbar from a different port. The issue still persists and is completely random.

    I also noticed that the Fuse light on the switch for that powerbar is flickering vs my other powerbar which is Solid red. Would a flickering light on the switch be indicative of something ?
    I also started going down the list of connected devices and it seems like the flickering almost goes away when I disconnect the heater…Could that be an issue or is the powerbar not able to keep up with the heater ? I don’t have very many things attached to the remaining other than a skimmer and a couple vortech pumps.

    Any thoughts?

  2. #2
    Join Date
    15.12.2023
    Posts
    2

    Default

    I never face this issue so I also don't know, but you can read this post. I see that it's related to your issue.
    https://forum.aquariumcomputer.com/a...hp/t-4857.html
    https://forum.aquariumcomputer.com/a...p/t-10116.html
    Last edited by raymondgadsden; 20.12.2023 at 15:52.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •