Zeige Ergebnis 1 bis 9 von 9

Thema: ProfiLuxControl 5.0.9.0

  1. #1
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.625

    Standard ProfiLuxControl 5.0.9.0

    can be downloaded

    http://www.aquariumcomputer.com/Download/ProfiLuxControl_V5009.exe

    new:
    - saving of settings in a file is possible
    - further improvements in communication (faster + more stable)

    additionally the quality of the connection to the device can be checked with the "communication monitor"
    (activate it in menu communication)
    Communicationmonitor.JPG

  2. #2
    Registriert seit
    21.11.2009
    Beiträge
    18

    Daumen hoch

    Zitat Zitat von Matthias Beitrag anzeigen
    can be downloaded

    http://www.aquariumcomputer.com/Download/ProfiLuxControl_V5009.exe

    new:
    - saving of settings in a file is possible
    - further improvements in communication (faster + more stable)

    additionally the quality of the connection to the device can be checked with the "communication monitor"
    (activate it in menu communication)
    Yes saving works.

    A littel hint in faster start up is to put in the ip of the profilux then it dont scan for the Profilux. Under General - Communication - Connection.

    /Bigman

  3. #3
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.625

    Standard

    Zitat Zitat von Bigman Beitrag anzeigen
    Yes saving works.

    A littel hint in faster start up is to put in the ip of the profilux then it dont scan for the Profilux. Under General - Communication - Connection.

    /Bigman
    makes sense if ProfiLux has static IP - if automatic IP is used it is possible that this automatically assigned IP changes from time to time

  4. #4
    Registriert seit
    13.03.2009
    Ort
    new york
    Beiträge
    253

    Standard

    Zitat Zitat von Matthias Beitrag anzeigen
    makes sense if ProfiLux has static IP - if automatic IP is used it is possible that this automatically assigned IP changes from time to time
    Matthias,
    How do i know if i have static IP for Profilux?.. Under communication i have 168.192.1.106


    mike
    Geändert von mshur (24.02.2010 um 14:52 Uhr)

  5. #5
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.625

    Standard

    this seems to be static

  6. #6
    Registriert seit
    07.06.2009
    Beiträge
    738

    Standard

    does it needs a specific minimal FW I have 5.00l on the P3 but

    I get an error while downloading the settings to file
    Error during reception of "COD_TIMER1_END7 - 0 - 11"
    (parameter number 723)


    ps: just tried again , crashed again but @ other setting, comm monitor gave continues green line and there there were 3 black ( 3 failed comms and it stopped )

    I'm using the TCP/ip option
    Geändert von Blahenazo (25.02.2010 um 19:53 Uhr)

  7. #7
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.625

    Standard

    black line means bad transmission, after 3 failed transmissions ProfiLux disconnects automatically

    -> not the firmware is the problem, it seems the LAN-connection is not stable
    do you have some details for me? LAN?WLAN? IP? static auto? average response time...

  8. #8
    Registriert seit
    07.06.2009
    Beiträge
    738

    Standard

    Hmmm, I would be surprised if it would be my network being instable.
    I have 3 comps, 1 networkprinter, Wii, PS3 , 2 Nas,P3 on the network (some wired other wifi) and they don't have any issue with the network.

    average response was around 30-35 ms.
    P3 is connected via CAT5 to my router and the host computer was my laptop (via wifi G ) in this case
    ip is fixed DHCP for the P3

    I will try to get some info with wireshark or something.
    Geändert von Blahenazo (26.02.2010 um 08:52 Uhr)

  9. #9
    Registriert seit
    07.06.2009
    Beiträge
    738

    Standard

    hello,

    Did some sniffing on my network see
    http://www.aquariumcomputer.com/Foru...ead.php?t=1691

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •