Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Ghl Control Center

  1. #1
    Join Date
    08.02.2018
    Posts
    7

    Default Ghl Control Center

    Hallo.

    Ich hab leider seit zwei Wochen das Problem dass ich mein Control Center am Laptop zwar öffnen kann aber sofort nach dem öffnen der Button erscheint „ verbinde…. Lade Systeminformation bitte warten“ und das Programm hängt sich auf.

    Wie bekommen ich das Control Center wieder zum laufen ?

    MfG

  2. #2
    Join Date
    10.10.2013
    Posts
    992

    Default

    Hallo,

    Wahrscheinlich haben Sie beim Start der Software die automatische Verbindung aktiviert.
    Und ich vermute, dass sie versucht, eine falsche Verbindungseinstellung zu verwenden, was zu ihrem Absturz führt.
    Sie können die GCC-Konfiguration löschen, indem Sie den Ordner GHL Control Center unter %AppData%Roaming löschen (oder ihn umbenennen, um eine Sicherungskopie zu erstellen).
    GCC wird den Ordner neu erstellen und Sie müssen die Verbindung zum GHL-Gerät neu konfigurieren.
    So greifen Sie auf den Ordner %AppData% zu: https://www.google.com/search?q=%25AppData%25

    Gaël
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

  3. #3
    Join Date
    08.02.2018
    Posts
    7

    Default

    Dankeschön für die schnelle Antwort
    Ich bin wie oben beschrieben vorgegangen aber leider konnte mein Problem damit nicht gelöst werden.
    MfG

  4. #4
    Join Date
    10.10.2013
    Posts
    992

    Default

    GHL Control Center muss vollständig geschlossen werden, bevor Sie den Ordner löschen.
    Können Sie Screenshots davon zeigen, was Sie gelöscht haben und auch von dem Problem.

    Gaël
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

  5. #5
    Join Date
    08.02.2018
    Posts
    7

    Default

    Ich kann nur ein Bild vom Problem schicken die gelöschte Datei hab ich leider nicht fotografiert
    Attachment 13388

  6. #6
    Join Date
    10.10.2013
    Posts
    992

    Default

    Dank.
    Der Ordner wurde offensichtlich nicht gelöscht, also können Sie den Löschvorgang wiederholen und mir zeigen, was Sie löschen.

    Gaël
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

  7. #7
    Join Date
    08.02.2018
    Posts
    7

    Default

    Oke ich schicke dann morgen das Bild von dem Ordner heute klappt es leider nicht mehr
    Danke schonmal

  8. #8
    Join Date
    08.02.2018
    Posts
    7

    Default

    Ich habe es vorhin nochmal probiert jetzt hat es geklappt

    Ich kann im Ghl Control Center meinen doser wieder hinzufügen aber beim Versuch den Doser zu verbinden hängt sich das Programm leider trotzdem auf.
    ABE17F00-FA8A-474B-86AF-A2A27B8D1A82.jpg

    MfG

  9. #9
    Join Date
    10.10.2013
    Posts
    992

    Default

    Hallo,

    Können Sie mir einen Screenshot des Gerätemanagers im Abschnitt "COM & LPT Ports" sowie einen Screenshot der Verbindungseinstellungen in GCC zeigen?

    Gaël
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

  10. #10
    Join Date
    08.02.2018
    Posts
    7

    Default

    Hier die zwei Screenshot

    GCC.jpg
    Geräte-Manager.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •