Results 1 to 5 of 5

Thread: Flow and level sensor compatibility

  1. #1
    Join Date
    30.09.2022
    Posts
    9

    Default Flow and level sensor compatibility

    Hi everyone,
    I just have a couple of questions about sensor configuration and compatibility:

    Firstly, on a Profilux 4, am I correct in that I can run 2x level sensors and 2x flow sensors using 2x Y-adapters on the system as-is? Or does this require an expansion card to achieve?
    Secondly, once the cable is available for the Profilux Mini WiFi in 2023, will it be able to support a flow sensor or only level sensors?

    Thanks again for your help!

  2. #2
    Join Date
    10.10.2013
    Posts
    994

    Default

    Hi

    For 2 flow sensor and 2 level sensor with 2 Y on P4 -> yes.
    For flow sensor on mini this need to be clarified, adapter no yet available.

    PS: See also: https://www.aquariumcomputer.com/kno...-flow-sensors/

    Gaël

  3. #3
    Join Date
    30.09.2022
    Posts
    9

    Default

    Hi Gaël,
    thank you so much! Will the Profilux Mini WiFi support the flow sensor once the adapter is available?

  4. #4
    Join Date
    10.10.2013
    Posts
    994

    Default

    Hi,

    As I wrote, this will need to be clarified. At the moment only level functionality is planned. For the flow, maybe after, it's too early to know sorry.

    Gaël

  5. #5
    Join Date
    30.09.2022
    Posts
    9

    Default

    Ah I see, no problem at all - thank you so much for your help - very appreciated!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •