Before you connect your Doser and KHD to the P4e, go into your SA Doser and copy the pump flow rates for each head that is used by the KHD. Write down your KHD settings too. This info will have to be entered into the P4e so when you bring over the KHD/Doser, it will continue testing exactly as it was doing before.
Once that is done, set the SA Doser to slave mode:
https://www.aquariumcomputer.com/kno...to-slave-mode/
Then, connect this now "slave" doser and KHD to the P4e with a PAB cable and assign them to the controller:
https://www.aquariumcomputer.com/kno...n-pab-devices/
After the above is completed, you can enter your pump calibration info and KHD settings.
Bookmarks